LAND ALLOWANCE PLANS
|Minimum Term||12 months||3 months||3 months||3 months|
|Out of Bundle per MB||$5.99||$5.07||$4.15||$3.25|
|Early Termination Fee||$438.00||$182.50||$685.00||$1,825.00|
|Voice to Fixed||$0.88||$0.88||$0.88||$0.88|
|Voice to Iridium||$0.72||$0.72||$0.72||$0.72|
|Voice to Other MSS||$16.45||$16.45||$16.45||$16.45|
|2 Stage Dialling||$1.10||$1.10||$1.10||$1.10|
|Local Access Number||$1.10||$1.10||$1.10||$1.10|
Please check the contract for full terms and conditions.
Shared plans are also available - contact us for details.
Voice calls priced per minute. Minimum billable increments apply.
Thales MissionLink is the first land based terminal to be released for the high speed satellite data service, Iridium Certus. Iridium Certus is a new service available as a result of the launch of Iridium's 2nd generation constellation of 66 satellites providing global coverage, pole to pole.
MissionLink is suitable for mounting on vehicles or for use at fixed stations and buildings. The compact and lightweight antenna means it can be installed on a variety of assets - allowing the tracking of vehicles and machinery and offering the use of voice and data communication to personnel using the equipment.
Easy to install and manufactured to military standards, MissionLink is equipment you can rely on when it matters.
Thales MissionLink Key Features:
- High speed data up to 700kbps*
- Streaming up to 256 kbps
- 3 voice lines
- Location Tracking
- Push-to-talk (PTT) compatibility
* Initial data speed up to 352 kbps, future firmware upgrade will become available to improve speed to 700 kbps. Fees apply.
|Below Deck Unit Specifications|
|Dimensions||30.5 x 22.9 x 7.6 cm (12 x 9 x 3 inches)|
|Weight||3.4 kg (7.5 lb)|
|Power||12 VDC input, 11A max (7A avg.) includes powering external VesseLINK High Gain Antenna|
|Connectors||Front: RJ-45 LAN (3) Class 2 PoE
RJ-45 WAN (1) for cellular connection
Rear: DC Power Input (10-32V) MIL-STD-1275D
DC Power Input, +12V Regulated
GPIO (RS-232, +12V out, DISTRESS, Radio Gateway,
TNC Connector, RF connection to Antenna
Wi-Fi reverse SMA
|Mechanical Vibration and Shock||MIL-STD-810G, Test Method 514.6, Proc. 1, Category
20, Annex D MIL-STD-810G, Test Method
516.6, Proc. IV
|Dimensions||14 in dia. x 9 in h
(35.6 cm dia. x 22.9 cm h)
|Weight||7 lb (3.2 kg)|
|Power||Directly powered by the terminal at 24 VDC|
|Operating Temperature||-30 to +55 degrees C|
|Mechanical Vibration and Shock||MIL-STD-810G, Test
Method 514.6, Proc. 1, Category 20, Annex D MIL-STD-810G, Test Method 516.6, Proc IV